| Type AC | Detects sinusoidal alternating residual currents. | Provides protection against AC earth-leakage currents within its rated operating characteristics. | Simple circuits where the connected loads produce sinusoidal AC residual current. | May not respond correctly to residual currents containing pulsating DC or other waveform components. Check local regulations and the characteristics of connected equipment before selection. |
| Type A | Detects sinusoidal AC and pulsating DC residual currents. | Provides residual-current protection for common electronic loads that can produce pulsating DC leakage. | Household appliances and electronic equipment, such as many single-phase devices with rectifiers. | It is not intended to detect smooth DC residual current as a Type B device does. Confirm equipment requirements and applicable standards. |
| Type F | Detects Type A waveforms and specified composite-frequency residual currents associated with certain single-phase converters. | Provides residual-current protection designed for specified mixed-frequency conditions and improved resistance to unwanted tripping in relevant applications. | Some single-phase variable-speed drives, inverter-powered appliances, and similar converter-fed loads. | Use where the equipment manufacturer or installation design calls for Type F. It does not replace Type B where smooth DC detection is required. |
| Type B | Detects AC, pulsating DC, and smooth DC residual currents, as well as specified frequency components. | Provides residual-current protection for installations where power electronics may generate smooth DC leakage. | Some three-phase drives, photovoltaic systems, battery equipment, and electric-vehicle charging installations, subject to the equipment design. | Check the applicable product standard and the connected equipment instructions for the required device type and frequency range. |
| RCCB (Residual Current Circuit Breaker) | Available with different residual-current detection types, such as AC, A, F, or B. | Disconnects a circuit when residual current meets its specified operating conditions. It does not provide integral overload or short-circuit protection. | Circuits protected against overcurrent by a separate appropriately rated circuit breaker or fuse. | Coordination with separate overcurrent protection is required. Select the RCCB’s current rating, residual operating current, poles, and type for the installation. |
| RCBO (Residual Current Circuit Breaker with Overcurrent Protection) | Available with different residual-current detection types, depending on the device. | Combines residual-current protection with overload and short-circuit protection in one device. | Individual final circuits where combined protection and circuit-level isolation are required. | Check residual-current type, rated current, breaking capacity, pole configuration, and trip characteristics against the circuit design. |