| Product specification | Confirm whether the product is an equal-leg or unequal-leg L angle. Specify leg lengths, thickness, length, steel grade, surface condition, and required tolerances. | Approved technical datasheet and order specification listing dimensions, grade, standard, and permitted tolerances. | Use the same units and dimensional definitions in the quotation, purchase order, inspection plan, and shipping documents. |
| Applicable standards | Check that the quoted standard matches the intended application and destination-market requirements. Examples include EN 10056 for structural steel angles and ASTM A36 for applicable carbon structural steel products. | Mill documentation identifying the production standard and grade; confirm the exact standard edition and any supplementary requirements. | Standards are not automatically interchangeable. Have the buyer’s engineer or project specification confirm equivalency before ordering. |
| Grade and mechanical properties | Verify the specified grade and required mechanical properties. For example, S235JR and S355JR are structural steel grades defined under EN 10025-2. | Mill test certificate showing grade, heat or cast number, chemical analysis, and applicable mechanical test results. | Do not rely on a grade name alone; confirm the governing standard, test requirements, and acceptance limits in the contract. |
| Dimensional tolerances | Agree on leg dimensions, thickness, straightness, length tolerance, and any permitted deviations before production. | Applicable product standard, agreed inspection criteria, and dimensional inspection records for the ordered lot. | Include measurement methods and sampling arrangements in the purchase order, especially for project-critical dimensions. |
| Mill test certificate | Check that the certificate corresponds to the actual material and states the ordered grade, standard, dimensions, and test results. | Request an EN 10204 Type 3.1 inspection certificate when specified; verify heat numbers against product markings and packing records. | Specify certificate type and language in advance. A certificate should be traceable to the shipped material, not just a sample product. |
| Traceability | Confirm how each bundle or piece is linked to its heat or cast and production records. | Bundle tags, heat-number list, packing list, and a traceability procedure. | Make clear whether markings must remain legible after bundling, handling, or any surface treatment. |
| Supplier capability | Assess experience with the required angle sizes, grades, production route, order quantity, and export markets. | Current production range, sample inspection records, quality-management documentation, and verifiable trade references where available. | Ask whether the goods are produced at the stated facility or sourced from another mill, and identify the responsible party in the contract. |
| Pre-shipment inspection | Agree whether inspection will cover dimensions, appearance, quantity, markings, documents, and any specified tests. | Written inspection and test plan; inspection report from the agreed party if third-party inspection is required. | Define inspection timing, sampling, acceptance criteria, and responsibility for inspection costs before production or dispatch. |
| Surface condition and packing | Specify acceptable surface condition and whether the angles will be supplied bare, painted, galvanized, or otherwise treated. | Packing specification, treatment details where applicable, and photographs of completed bundles before loading. | Agree on bundle size, lifting points, corrosion protection, and protection against movement or moisture during transit. |
| Quotation and trade terms | Compare the product price, quantity basis, currency, production lead time, and included services. | Itemized quotation stating product specification, quantity, delivery point, and the named Incoterms® 2020 rule and location. | Compare quotations on the same delivery basis. Clarify who handles export clearance, main carriage, insurance, and destination charges. |
| Customs classification | Determine the correct tariff classification for the exact product, material, dimensions, and national customs rules. | Commercial invoice, packing list, product description, material specification, and any classification ruling or broker advice obtained by the importer. | Do not assume one HS code applies in every country. Confirm the import-country tariff code, duty rate, and any trade measures before ordering. |
| Shipping documents | Confirm that shipping documents consistently describe the goods, quantity, parties, and shipment details. | Commercial invoice, packing list, transport document, certificate of origin if required, and mill certificates as agreed. | Check destination-country requirements and documentary deadlines with the customs broker, carrier, or relevant authority before dispatch. |
| Landed cost and delivery risk | Calculate the total expected cost, including freight, insurance where applicable, duties, taxes, customs brokerage, port charges, and inland transport. | Freight quotation, insurance details where applicable, tariff information, and a written delivery schedule. | Allow for transit time, port congestion, customs clearance, and possible demurrage or storage charges when planning delivery. |
| Contract safeguards | Set out product requirements, inspection rights, delivery dates, payment milestones, claims process, and remedies for non-conforming goods. | Signed purchase contract or purchase order with the approved specification and referenced documents attached. | Resolve discrepancies between the quotation, technical documents, and order terms before payment or production begins. |