| Round enamelled copper wire | Copper; round cross-section | One or more layers of insulating enamel | Widely used winding-wire format; enamel provides electrical insulation while keeping the winding compact. | Motors, transformers, inductors, relays, and solenoids |
| Rectangular enamelled copper wire | Copper; rectangular or square cross-section | Insulating enamel applied around the conductor | Flat sides can support efficient space use in suitably designed slots and windings. | Motors, generators, transformers, and other space-constrained coils |
| Enamelled aluminum wire | Aluminum; commonly round or rectangular | Insulating enamel matched to the wire’s design requirements | Lower density and lower electrical conductivity than copper; conductor dimensions must account for the application’s electrical and thermal requirements. | Selected motors, transformers, and lightweight winding designs |
| Self-bonding magnet wire | Usually copper; round or rectangular options are available | Base insulation plus a bondable outer coating that can adhere between turns under specified heat or solvent conditions | Can form a more self-supporting coil without relying solely on a separate bobbin or additional binding. | Compact coils, small motors, sensors, and specialty inductors |
| Paper-covered copper wire | Usually flat or rectangular copper conductor | Electrical-grade paper wrapped around the conductor, sometimes in multiple layers | Layered paper insulation is used in winding designs where the insulation system is compatible with the equipment and its operating environment. | Oil-immersed transformers and other transformer windings |
| Glass-fiber-covered wire | Typically copper; round or rectangular forms | Glass-fiber covering; varnish or resin impregnation may be used as part of the insulation system | Textile-covered construction is selected for particular thermal, mechanical, or manufacturing requirements; performance depends on the complete insulation system. | Selected generators, motors, and high-temperature electrical coils |
| Heavy-build or multi-coat enamelled wire | Usually copper; commonly round, with other geometries available | Multiple enamel layers or a specified heavier insulation build | Insulation build is chosen to meet the required electrical, mechanical, and processing characteristics; it is not a separate conductor material. | Windings requiring a particular insulation build, including some motors and transformers |