| 1 | Ductile Iron | Pressure pipe, often with protective linings and exterior coatings | Water distribution and transmission; some wastewater and fire-protection systems | High strength, impact resistance, and suitability for buried pressure service | Corrosion protection, joints, bedding, and backfill should be selected for local soil and operating conditions. |
| 2 | PVC (Polyvinyl Chloride) | Solid-wall pressure pipe and gravity sewer pipe | Water mains, sewer lines, storm drainage, and utility conduits | Lightweight, corrosion-resistant, and available in a range of diameters and pressure classes | Use the product type and joint system rated for the intended service; protect pipe from excessive point loads and unsuitable handling. |
| 3 | HDPE (High-Density Polyethylene) | Solid-wall pressure pipe, including fusion-jointed systems; structured-wall products are also available | Water and wastewater mains, force mains, gas distribution, and trenchless or difficult alignments | Flexible, corrosion-resistant, and capable of leak-resistant fused joints when properly installed | Design must account for temperature, pressure, deflection, support, and the specific joining procedure. |
| 4 | Reinforced Concrete | Reinforced concrete pipe, typically manufactured in sections with gasketed or other specified joints | Stormwater drainage, culverts, and large-diameter gravity sewer systems | High structural capacity and availability in large diameters | Handling and installation require suitable lifting equipment; check reinforcement, joint details, and chemical exposure requirements. |
| 5 | Steel | Welded or fabricated steel pipe, commonly protected by coatings or linings | Water transmission, crossings, industrial services, and locations requiring specially designed strength | High strength and adaptability to custom diameters, fittings, and installation conditions | Corrosion control, coating repair, welding quality, and any required cathodic protection are important design considerations. |
| 6 | Corrugated Metal | Corrugated galvanized steel or aluminum pipe; may be supplied with coatings or a lining | Road culverts, stormwater conveyance, and drainage applications | Relatively lightweight and practical for many drainage and culvert installations | Service life depends on soil and water chemistry, abrasion, coating condition, and installation quality; it is not interchangeable with pressure-rated steel pipe. |
| 7 | Vitrified Clay | Short sections of fired clay pipe with gasketed or otherwise specified joints | Gravity sanitary sewers and some industrial wastewater systems | Resistant to many forms of chemical attack and does not corrode like metal | It is rigid and can be brittle under impact or uneven support; careful handling, bedding, and joint installation are essential. |
| 8 | Fiberglass-Reinforced Polymer (FRP/GRP) | Glass-fiber-reinforced resin pipe, often supplied with a smooth internal surface | Water and wastewater transmission, industrial pipelines, and corrosive environments | Corrosion resistance, relatively low weight, and potential for large-diameter applications | Design and installation should follow the product’s structural, jointing, handling, and backfill requirements. |
| 9 | Polypropylene (PP) | Structured-wall gravity pipe and, in suitable product systems, pressure pipe | Sanitary sewer, storm drainage, and other gravity-flow networks | Low weight and resistance to many chemicals; structured-wall designs can provide stiffness with efficient material use | Confirm that the pipe is rated for the required pressure or gravity service, and follow requirements for deflection, joints, and embedment. |
| 10 | Asbestos Cement (Legacy Material) | Older cement-based pressure and drainage pipe | Found in some existing buried water and sewer networks; generally a legacy rather than a routine choice for new work | Historically used for its relatively low weight and corrosion resistance | Contains asbestos fibers. Do not cut, break, or disturb it without qualified assessment and legally compliant handling; replacement and disposal rules vary by jurisdiction. |