| 1 | Automotive transmission and drivetrain parts | Gear teeth, shafts, and splines made from suitable hardenable steels; material grade and initial condition must be verified. | Measure at specified tooth or shaft locations using an approved Rockwell or Vickers method; compare with the part specification. | Use a polished, etched cross-section and a microhardness traverse to determine effective hardened depth against the specified hardness criterion. | Record laser power, scan speed, focal position, track overlap, and part temperature; check representative teeth or features across the batch. |
| 2 | Construction and earthmoving equipment components | Wear surfaces on pins, rollers, sprockets, and selected steel or cast-iron parts, subject to material qualification. | Take readings on defined wear zones and compare them with the drawing or approved control plan. | Section a qualified sample at the specified location; inspect the hardened layer and measure its depth by microhardness. | Verify scan-path coverage, fixture position, surface condition, and temperature feedback; inspect for untreated gaps and overheating. |
| 3 | Machine-tool guideways and slideways | Localized wear tracks on compatible steel or cast-iron machine beds and guide components. | Check hardness at multiple positions along the treated path, including start, middle, and end regions. | Use a cross-section from a representative location to confirm the hardened layer meets the specified depth profile. | Monitor beam alignment, focus distance, travel speed, and overlap; check straightness and distortion after processing. |
| 4 | Hydraulic cylinder rods and piston components | Specified hardenable steel rods, piston surfaces, and related wear-prone regions; coating or plating sequences require process review. | Measure hardness on the treated surface using a method suitable for the part geometry and surface finish. | Check a metallographic cross-section or qualified test coupon using a microhardness profile. | Control rotation or linear feed, beam-to-surface distance, and circumferential overlap; check for uniform coverage around the part. |
| 5 | Railway and transport equipment parts | Selected wheels, axles, and other wear-loaded steel components where localized hardening is permitted by the design. | Measure the specified surface zones and confirm readings meet the approved engineering requirements. | Determine depth on a section taken from a defined sampling location; evaluate the transition from hardened layer to core. | Maintain traceable process records and verify repeatability on qualified samples; inspect treated-area boundaries and part distortion. |
| 6 | Mining and mineral-processing equipment | Wear edges, teeth, shafts, and other compatible steel or cast-iron components exposed to abrasive service. | Check hardness at multiple points across the specified wear surface rather than relying on a single reading. | Use a sectioned sample and microhardness traverse to verify the hardened zone and its transition into the substrate. | Check surface preparation, scan overlap, thermal monitoring, and repeatability between parts; inspect for cracks and localized melting. |
| 7 | Agricultural machinery components | Wear areas on shafts, gears, rollers, and tillage components made from laser-hardenable grades. | Measure at the designated contact or wear locations using the specified hardness scale and test method. | Confirm effective depth on a representative cut section or qualified coupon using the agreed hardness threshold. | Control part positioning and scan trajectory; verify consistent coverage on repeated features and inspect for edge overheating. |
| 8 | Oil, gas, and fluid-handling equipment | Selected valve stems, pump shafts, sleeves, and other compatible components requiring localized wear resistance. | Test the treated region at defined locations and document the method, load, and measurement position. | Measure the hardened layer on a metallographic section; confirm the sampling location represents the critical service surface. | Monitor laser and motion-system records, surface temperature where applicable, and scan overlap; verify batch traceability. |
| 9 | Power-generation and heavy-industry parts | Selected shafts, bearing seats, and large steel or cast-iron components with localized hardening requirements. | Use a test method appropriate to the component size and geometry; map readings across the specified treated zone. | Assess case depth on a representative section or qualified witness sample; relate the result to the specified criterion. | Check long-path scan stability, focus distance, thermal history, and fixture movement; inspect for distortion and untreated areas. |
| 10 | Custom tooling and repair applications | Localized regions on compatible dies, molds, tooling, and repairable steel or cast-iron parts after material and repairability review. | Take hardness readings within and around the treated area to assess the hardened zone and adjacent material. | Qualify depth on a representative sample or repair procedure; use cross-sectional microhardness where required. | Document the approved repair path, parameter window, number of passes, and inspection results; check for cracking and excessive heat-affected areas. |