| 1 | Injection Molding Experience | Assess experience with the relevant molding process, machine configuration, part geometry, materials, and production environment. | Ask for comparable project references, process descriptions, and examples of systems installed for similar part and production requirements. |
| 2 | Machine and Robot Integration | Check compatibility with the molding machine, robot, controller, safety circuits, and any existing production equipment. | Request an integration plan showing interfaces, signal exchange, responsibilities, and how the system will be tested with the specified machine. |
| 3 | Part Take-Out and Handling | Review how parts, runners, inserts, and other items will be removed or handled without damage, contamination, or unnecessary cycle-time delays. | Request a handling concept, end-of-arm tooling details, sample cycle sequence, and a demonstration or trial using representative parts where feasible. |
| 4 | End-of-Arm Tooling | Evaluate whether the tooling suits the part’s shape, weight, surface, temperature, and required grip or release method. | Review tooling drawings, changeover method, wear items, maintenance access, and provisions for detecting a failed pickup or dropped part. |
| 5 | Cell Layout and Safety | Assess access for operators and maintenance, guarding, interlocks, emergency stops, material flow, and risks associated with robot motion and machine operation. | Request a proposed layout, documented risk assessment, safety-device list, and evidence that applicable local regulations and current standards will be addressed. |
| 6 | Quality Inspection and Vision | Determine whether inspection is needed for part presence, orientation, visible defects, assembly features, or other defined quality characteristics. | Ask for inspection specifications, sample images or test results, acceptance criteria, and an explanation of how rejected parts are identified and segregated. |
| 7 | Controls and Data Connectivity | Review the controls architecture, alarm handling, recipe or job selection, production data needs, and connection requirements for plant systems. | Request an I/O and communications list, data-flow description, user-access approach, and confirmation of which interfaces are included in the proposed scope. |
| 8 | Changeover and Flexibility | Evaluate how the cell will accommodate different molds, parts, tooling, or production recipes, and how changeover tasks are controlled. | Request a documented changeover procedure, estimated changeover steps, tooling storage concept, and details of recipe validation or error-proofing features. |
| 9 | Commissioning and Support | Compare installation planning, operator and maintenance training, troubleshooting support, spare-parts availability, and service coverage for the intended operating location. | Request a commissioning schedule, training plan, support response terms, recommended spare-parts list, and warranty and service conditions in writing. |
| 10 | Total Cost and Business Case | Consider equipment, integration, installation, training, maintenance, tooling, and expected operating costs alongside the production benefits. | Ask for an itemized quotation and a business-case calculation that clearly states its assumptions, including cycle time, staffing, uptime, production volume, and payback method. |