| 1. Measure viscosity | Record viscosity at the actual filling temperature. Note whether the product flows easily or becomes thicker when cooled. | The product must flow consistently through the feed system and filling nozzle. | Gravity or overflow filling may suit many free-flowing liquids; piston or pump-based systems are often considered for thicker products. | Does viscosity change with temperature, mixing, or time? Is the product shear-sensitive? |
| 2. Check for particulates | Document particle size, shape, concentration, and whether particles settle or remain suspended. | Particles must pass through the product path without clogging, crushing, or separating excessively. | Consider a suitable piston or pump system, a product path with adequate clearance, and a nozzle sized for the largest particle. | What is the largest particle? Can the mixture be gently agitated during filling? |
| 3. Assess foaming and aeration | Identify whether the product foams when poured, splashed, or exposed to air. | Minimize bubbles, overflow, and inconsistent fill levels. | A diving nozzle that fills from the bottom upward, controlled flow, or a staged filling cycle may help reduce splashing. | Does foam dissipate quickly? Is headspace or appearance especially important? |
| 4. Identify product behavior | Determine whether the product is shear-sensitive, temperature-sensitive, abrasive, or prone to settling. | Maintain product quality while ensuring repeatable delivery to each container. | Specify gentle pumping or mixing where needed, and select product-contact components compatible with the product. | Can pumping or agitation change the product’s texture, stability, or performance? |
| 5. Define the container | Record container material, shape, opening size, capacity, and dimensional variation. | Position containers reliably and deliver product without spills or damage. | Match the nozzle, container handling, and change parts to the container opening and production format. | Will the same line handle multiple container sizes or materials? |
| 6. Set the fill volume or weight | Specify the target quantity and how it will be measured: by volume, weight, or fill level. | Achieve the required consistency while accounting for product density and measurement method. | Volumetric dosing, gravimetric filling, or level-based filling may be appropriate depending on the product and package. | Is the target defined by net weight, volume, or visual level? What tolerance applies to the product and market? |
| 7. Set the accuracy requirement | Consider product value, package size, product variability, and applicable legal requirements. | Specify an acceptable fill variation and a method for verifying performance. | Evaluate the complete system under real production conditions; accuracy depends on the product, container, machine setup, and operating conditions. | How will fill performance be sampled, recorded, and adjusted during a production run? |
| 8. Choose a realistic production rate | Estimate required output by shift, container size, and product type. | Meet production targets without sacrificing fill consistency or creating excessive splashing. | Compare the required line speed with the number of filling heads, container handling, and product delivery capacity. | Does the rate include changeovers, cleaning, replenishment, and normal downtime? |
| 9. Plan cleaning and product changeovers | Identify allergen, hygiene, residue, and cross-contamination risks, as well as the number of products run on the line. | Clean and inspect product-contact areas effectively between batches or products. | Assess access for manual cleaning or the suitability of a clean-in-place arrangement for the specific process. | How often will products change? What cleaning procedure and verification are required? |
| 10. Confirm wetted-material compatibility | Review product chemistry, temperature, cleaning agents, and any corrosive or abrasive properties. | Prevent unwanted reactions, corrosion, contamination, and premature wear. | Specify compatible materials and seals for every product-contact component, based on the product and cleaning conditions. | Have compatibility requirements been reviewed for the product, seals, tubing, valves, and cleaning chemicals? |