When choosing an LED spotlight, check what its IP rating actually covers. Under IEC 60529, IP65 means the enclosure is dust-tight and protected against water jets from any direction under specified test conditions. The first digit, 6, indicates no dust ingress during the test. The second digit, 5, indicates resistance to water jets. Not immersion.
That distinction matters outdoors. Rain or a routine hose-down may be within the intended protection, but IP65 does not mean the light can sit underwater or withstand every pressure washer. Nor does the rating guarantee resistance to corrosion, impact, or heat. These are separate considerations. A fixture near coastal air, for example, may need suitable materials as well as a sealed enclosure.
Check the complete spotlight, not just the housing description. Gaskets, cable glands, and the rear connection can become weak points if they are damaged or poorly fitted. Look for clear installation instructions, and keep seals clean when mounting the light. A tight screw can still pinch a gasket. It is an easy detail to miss. If the product will face direct jets or frequent cleaning, confirm the manufacturer’s stated conditions rather than relying on “waterproof” as a broad promise.