| 1. Match the pallet load to the forklift rating | Check the forklift capacity plate for its rated load, specified load center, and any limits for the fitted mast or attachments. The truck’s capacity can be lower than its nominal rating when these details differ from the rating conditions. | A 600 mm load center is common on some metric trucks, but it is not universal. Use the load center shown on the specific truck’s plate and consult the truck supplier if the load extends farther forward. |
| 2. Calculate the actual load center | The load center is the horizontal distance from the vertical face of the forks to the center of the load. For a uniform load distributed evenly along its depth, it is approximately half the load depth. | A uniformly distributed load that is 1,200 mm deep has an approximate 600 mm load center when positioned evenly. Off-center or uneven loads can shift the actual center and affect safe handling. |
| 3. Check the pallet’s capacity for the intended use | Ask for the pallet’s documented safe working load under the relevant conditions. Static, moving (dynamic), and rack-supported capacities describe different uses and should not be treated as interchangeable. | Confirm whether the pallet will be moved by forklift, stored on rack beams, or stacked on the floor. Use a capacity rating that covers the actual support and handling conditions. |
| 4. Match pallet dimensions to the load and storage layout | Confirm the pallet’s length and width against the load footprint, forklift handling space, conveyor openings, and rack or storage dimensions. | Common pallet footprints include 1,200 × 1,000 mm and 1,200 × 800 mm in many markets. Verify the required regional and site dimensions rather than assuming one size fits all. |
| 5. Measure fork entry and clearance | Check the pallet’s entry openings, fork spacing, fork thickness, and clearance beneath the deck. The forks must enter fully and support the pallet as intended without contacting deck boards or blocks. | Measure the actual forklift forks and compare them with the pallet’s entry dimensions and the directions from which the pallet must be accessed. |
| 6. Choose a material suited to the environment | Consider load type, moisture, cleaning requirements, temperature, impact exposure, and whether the pallet must be repairable or nestable. Material alone does not establish a pallet’s capacity. | Wood, plastic, and metal pallets each have different handling and maintenance considerations. Confirm that the selected design is suitable for the workplace and intended load. |
| 7. Inspect construction and confirm compatibility | Review deck condition, stringers or blocks, joints, visible damage, and any required marking or documentation. Confirm compatibility with the truck, rack, conveyor, and handling method. | Before purchase, test a sample with the intended forklift and load. Reject pallets with cracks, loose components, severe deformation, or damage that compromises support. |