| Automatic roll-filter unit in an air-handling system | Media-track width, roll-core diameter, available roll diameter, and feed direction | 1.0 m wide × 20 m long; confirm core and maximum roll diameter against the unit | Progressively structured synthetic-fiber media, often supported by a scrim or backing layer | Match the media width and roll dimensions to the track and drive system. Check pressure drop, dust-holding capacity, and the unit’s media-feed controls. |
| Cut-to-size HVAC filter bank or panel frames | Frame opening, retaining depth, and the largest practical roll width for cutting | 1.2 m wide × 20 m long; cut panels to suit each frame | Nonwoven polyester or blended synthetic-fiber media in a suitable thickness and density | Choose media that can be secured without gaps or bypass. Compare airflow resistance and filtration requirements using the same test method and rating system. |
| Commercial or industrial prefilter section | Rack width, filter depth, airflow direction, and replacement access | 0.6–1.2 m wide × 15–30 m long, subject to rack layout | Lightweight synthetic or glass-fiber roll media; some grades include a reinforcing scrim | A prefilter is generally selected to capture larger airborne particles and help protect downstream filters. Verify that the media is compatible with the system’s airflow and operating conditions. |
| Paint-booth exhaust arrestor | Exhaust-grid width, media thickness, installation orientation, and roll storage space | 1.0 m wide × 20 m long; select thickness to fit the grid or holding frame | Paint-arrestor media, commonly made from progressively structured glass or synthetic fibers | Use media intended for paint overspray capture, not ordinary HVAC prefiltration. Check the manufacturer’s airflow and loading guidance, and replace it when loading affects booth performance. |
| Outdoor-air intake with a roll-media filter section | Filter-track width, roll changeout clearance, and exposure to moisture or weather | 0.8–1.2 m wide × 15–25 m long; verify the unit’s permitted roll diameter | Moisture-tolerant synthetic-fiber media, with support where required by the equipment | Consider the intake environment, drainage, and media support. Confirm that the selected media is suitable for the expected humidity and does not obstruct the feed mechanism. |
| Custom filter panels cut from a bulk roll | Panel length and width, cutting allowance, edge retention, and quantity per roll | 0.5–1.5 m wide × 10–30 m long, depending on panel dimensions and supplier format | Flexible nonwoven media selected by fiber type, thickness, density, and support-layer needs | Calculate usable yield after allowing for trimming and defects. Make a trial cut and confirm the panel stays in place without tearing or leaving perimeter gaps. |