| Required load capacity | Maximum load per beam level, number of loaded levels, and total bay load | Uprights carry the loads transferred through the beams. Capacity depends on the complete rack configuration, not just the upright profile. | Use the rack supplier’s load tables for the exact frame height, beam elevations, beam lengths, and loading conditions. Do not estimate capacity from appearance alone. |
| Upright height | Floor-to-top-of-frame height; record in millimetres or inches | Frame height affects storage layout, available clearance, and the rack’s structural capacity. | Measure the usable building height and account for sprinklers, lighting, roof structure, and required operating clearances before choosing a frame. |
| Frame depth | Front-to-back frame dimension, matched to the load and beam arrangement | The frame depth supports the load across the rack and must suit the pallet or stored product dimensions. | Check the actual pallet or load footprint, including overhang. Confirm the required frame depth and any permitted overhang with the rack designer. |
| Upright profile and steel thickness | Profile shape, face dimensions, steel thickness, and manufacturer’s section data | These properties influence the upright’s strength and stiffness, but a larger-looking profile does not by itself establish a safe load rating. | Compare certified specifications for the complete upright frame. Avoid selecting a replacement based only on matching external dimensions. |
| Beam connection compatibility | Connector type, slot pattern, connection dimensions, and locking mechanism | Beam connectors must engage correctly with the upright. Incompatible connections can prevent secure installation or alter the rack configuration. | Verify that beams and frames are designed to work together. Do not assume that visually similar slots or connectors are interchangeable. |
| Beam elevations and spacing | Number of beam levels, vertical spacing, and the lowest and highest beam positions | Upright capacity can change with beam spacing and the positions of the beam connections. | Provide the proposed beam layout when requesting a capacity check. Changes to beam heights may require a new engineering review. |
| Floor and anchoring conditions | Floor condition, slab information, baseplate dimensions, and anchor requirements | Rack forces pass through the baseplates and anchors into the floor. A suitable upright cannot compensate for an inadequate floor or anchoring arrangement. | Confirm floor suitability and anchoring details with a qualified rack designer or structural professional, especially for new or heavily loaded installations. |
| Impact and damage exposure | Forklift traffic, aisle width, protective barriers, and visible column damage | Impact damage can reduce an upright’s capacity and may make a frame unsafe even when damage appears limited. | Use appropriate column protection where needed, inspect regularly, and remove damaged components from service until they have been assessed and repaired or replaced. |
| Replacement and system identification | Frame dimensions, connection details, load rating, and available system documentation | Upright frames that look similar may have different structural properties or connection designs. | Identify the existing rack system and verify replacement compatibility and capacity before installation. Keep configuration and inspection records available. |