| Bare copper | Very high; copper is approximately 100% IACS as a reference material. | Best for dry, clean indoor locations where exposure to corrosive substances is limited. | Uncoated copper can oxidize or tarnish. Check compatibility with the conductor, terminal surface, and installation environment. | General-purpose electrical connections in protected indoor settings. |
| Tin-plated copper | Very high; the copper base provides the main current-carrying capacity. | A practical choice for humid conditions and many outdoor or mildly corrosive applications when the terminal is properly sealed and installed. | The tin layer helps protect copper from oxidation and can help maintain a usable contact surface. It does not make a connection waterproof or suitable for every chemical environment. | Automotive, marine, battery, and general electrical wiring applications where added surface protection is useful. |
| Nickel-plated copper | High; the copper base remains highly conductive, though the finish is selected mainly for surface performance. | Useful where higher temperatures or certain demanding industrial conditions make a more heat-resistant finish desirable. | Nickel finishes can offer good wear and oxidation resistance, but suitability depends on the specific chemicals, temperature, and terminal design. Confirm application ratings. | Selected industrial or elevated-temperature connections where the lug manufacturer specifies a nickel finish. |
| Silver-plated copper | Very high; silver is highly conductive, while the copper base carries most of the current. | Used in specialized electrical connections, including some high-performance or elevated-temperature applications. | Silver can tarnish, particularly in sulfur-containing environments. It is typically chosen for specific performance requirements rather than as a universal corrosion-resistant finish. | Specialized switchgear, power, or high-performance electrical contacts. |
| Aluminum | Medium-high; aluminum has lower electrical conductivity than copper by volume, so lug sizing and ratings matter. | Appropriate when the lug is designed and listed for the aluminum conductor and the intended environment. | Aluminum forms an insulating oxide layer. Use the specified termination method, compatible hardware, and any required joint compound; avoid unapproved copper-to-aluminum combinations. | Connections made with aluminum conductors, when the lug is specifically rated for them. |