| Furniture application | Kitchen base cabinets with full-overlay doors | Kitchen, bathroom, wardrobe, office, and display furniture can have different use and durability requirements. | Confirm the hinge is intended for the application, expected use frequency, and installation environment. |
| Hinge type | Concealed cup hinge for a frameless cabinet | Common furniture options include concealed cup hinges, butt hinges, and pivot hinges. Selection depends on cabinet construction and appearance. | Specify cabinet construction, door position, and whether the hinge should be visible when the door is closed. |
| Door dimensions and weight | Provide the actual door height, width, thickness, material, and finished weight for each door size. | The suitable hinge count depends on door dimensions, weight, material, hinge geometry, and use conditions; one fixed count does not suit every door. | Request a hinge-count recommendation for each door size and ask what assumptions or test conditions support it. |
| Door thickness and cup drilling | Set the door thickness and cup-hole dimensions from the chosen door design and hinge drawing. | A 35 mm cup diameter is common for many concealed furniture hinges, but cup depth, edge distance, and suitable door thickness vary by model. | Obtain a dimensioned drilling diagram and verify it against the door material and available drilling equipment before production. |
| Overlay and cabinet construction | Full overlay on a frameless cabinet; provide panel thickness and required door gap. | Full overlay, half overlay, and inset arrangements use different hinge geometry and mounting positions. | Confirm the overlay or inset measurement, mounting-plate height, door gap, and compatibility with adjacent doors or panels. |
| Opening angle and clearance | Specify the minimum required opening angle and identify nearby walls, drawers, and handles. | Many concealed hinges are designed around opening angles near 95°–110°; wider-angle models are available for some applications. Actual clearance depends on the installation. | Ask for the opening-angle specification and check the door path with the actual cabinet layout and handle dimensions. |
| Closing function | Soft-close function for doors in the main kitchen area. | Options may include soft-close, self-closing, or free-swinging designs. Damping performance can vary with door size and adjustment. | Confirm whether damping is integrated or uses a separate accessory, and test closing behavior on a representative door. |
| Adjustment | Provide accessible adjustments for aligning doors after installation. | Many concealed hinges offer adjustments in multiple directions; adjustment range and mechanism differ by model. | Request an adjustment guide and verify that installers can reach the adjustment points once the cabinet is assembled. |
| Material and finish | Select a corrosion-resistant finish appropriate to the room and expected exposure to moisture. | Hinges may use steel or stainless-steel components with different surface finishes. Material and finish affect corrosion resistance and appearance. | Specify the required material and finish, and request applicable test information for the intended environment. |
| Mounting hardware | Include compatible mounting plates and the required screws in the project specification. | Plate height, screw type, and fixing method influence fit and installation; suitable hardware depends on the cabinet material and design. | Confirm exactly which components are included and test the supplied fixings with the intended panel material. |
| Testing and acceptance | Approve a production-representative sample before placing the full order. | Fit, alignment, closing action, finish, and cycle-test results should be assessed using agreed methods and acceptance criteria. | Agree on sample approval, inspection points, test method, acceptable tolerances, and how nonconforming goods will be handled. |
| Order and delivery planning | State forecast quantity, required delivery date, packaging needs, and destination. | Lead time, minimum order quantity, packaging, and shipping arrangements vary by product configuration and order. | Request a written quotation that identifies the exact hinge configuration, included parts, production lead time, packaging, and delivery terms. |