| Filter material | Fine mesh, paper, or a cloth filter affects clarity, oils, sediment, and cleanup. | Mesh is reusable and allows more oils and fine particles through. Paper generally produces a cleaner, less gritty cup but requires replacement filters. Cloth can offer a middle ground and needs thorough cleaning and drying. |
| Filter fit and capacity | Check whether the filter stays securely in place and holds enough grounds for the intended batch. | Choose a filter that is easy to remove without spilling grounds. Confirm the maker’s usable water capacity and whether its filter basket leaves room for grounds to expand. |
| Coffee-to-water ratio | Ratios are usually expressed as grams of dry coffee per litre of water; recipes vary with taste and intended serving style. | As a starting point, try about 60–80 g/L for ready-to-drink cold brew or about 125–200 g/L for a concentrate intended to be diluted. Adjust to taste; these are practical starting ranges, not universal standards. |
| Batch measurement | Look for clear volume markings, and measure coffee and water consistently. | A kitchen scale makes ratios easier to repeat than scoops. For example, 75 g of coffee with 1 L of water gives a 75 g/L brew ratio. |
| Grind size | Consider whether the filter can retain the grind size you plan to use. | A coarse, relatively even grind is a common starting point for immersion cold brew. Very fine grounds can pass through some mesh filters and make the brew harder to filter. |
| Steeping conditions | Cold brew is typically made by steeping grounds in cool or room-temperature water for an extended period. | Start with roughly 12–24 hours, then adjust based on taste, grind, and recipe. Steeping in a refrigerator slows the process compared with steeping at room temperature; use a covered, food-safe vessel. |
| Ease of cleaning | Check whether the basket, lid, and vessel can be taken apart and washed thoroughly. | Removable components make it easier to discard wet grounds and clean away coffee oils. Follow the maker’s care instructions, especially for reusable cloth or fine-mesh filters. |
| SCA 55 g/L reference | The Specialty Coffee Association’s commonly cited 55 g/L figure is a hot-brewing reference, not a required cold-brew recipe. | Do not treat 55 g/L as a cold-brew standard. Cold-brew recipes often use different ratios, depending on whether the result is meant to be served directly or diluted. |
| Serving and storage | Consider how the finished brew will be poured, stored, and served. | A sealed vessel helps limit exposure to air and fridge odors. Keep prepared cold brew refrigerated and use clean equipment; dilution at serving time lets you adjust strength in the cup. |