| Product-standard alignment | China: GB/T 1499.2. Other common references include ISO 6935-2, ASTM A615/A615M, and EN 10080, subject to applicable national requirements. | Confirm the exact standard, edition, grade, nominal diameter, and delivery condition in the purchase contract. Do not assume that compliance with one standard automatically establishes compliance with another. | Contract specification; supplier’s standard-compliance declaration; relevant test reports. |
| Mechanical properties | Test methods and acceptance limits are specified by the applicable product standard and grade. | Check yield strength, tensile strength, elongation, and any required tensile-to-yield ratio or bend test. Confirm that results meet the ordered grade—not merely a general product description. | Heat- or batch-linked mill test certificate (MTC); test results identifying the method and units. |
| Chemical composition and weldability | Limits depend on the selected grade and market standard. Carbon equivalent may be specified where weldability is relevant. | Review the specified limits for carbon, manganese, phosphorus, sulfur, and other grade-specific elements. If welding is anticipated, agree on the required carbon-equivalent formula and limit in advance. | Heat analysis on the MTC; product-analysis results when required by the contract. |
| Dimensions and rib geometry | Dimensional tolerances, nominal mass, and rib requirements are governed by the applicable product standard. | Verify nominal diameter, mass per unit length, permitted tolerances, and rib geometry against the ordered specification. Agree on the inspection and sampling basis. | Dimensional inspection records; calibrated measurement equipment records; product-standard clause references. |
| Coil condition and processing | Coil form and permitted handling details should be stated in the order; requirements vary by product and application. | Specify coil mass and dimensions, inner and outer diameter where needed, end condition, tying, and allowable handling damage. Confirm compatibility with the buyer’s decoiling and straightening equipment. | Approved packing specification; pre-shipment photographs; agreed inspection checklist. |
| Test methods | ISO 15630-1 covers test methods for reinforcing steel; the applicable product standard or contract determines which tests are required. | Confirm test frequency, sampling, specimen preparation, retest rules, and whether testing is performed by the mill or an independent laboratory. | Traceable laboratory reports; sampling plan; instrument calibration records where required. |
| Inspection and traceability | Traceability is typically established through heat, batch, bundle, or coil identification as agreed by the buyer and supplier. | Check that physical markings and shipping documents connect each coil to its test results. Define how mixed heats, relabeling, and missing identification will be handled. | Coil tags; packing list; heat-number register; MTC-to-coil traceability records. |
| Quality-management certification | ISO 9001 is a quality-management-system standard; it is not a product certificate or proof that a particular shipment meets rebar requirements. | Verify the certificate’s validity, issuing certification body, covered manufacturing site, and scope. Separately confirm product compliance and shipment test results. | Current certificate and verification details from the issuing certification body. |
| Environmental and occupational-safety systems | ISO 14001 relates to environmental management; ISO 45001 relates to occupational health and safety management. | Consider these as management-system indicators, not substitutes for product testing, regulatory approvals, or destination-market requirements. | Current, site-specific certificates and their scopes, if these certifications are required by the buyer. |
| Pre-shipment assurance | Inspection scope and acceptance criteria should be written into the purchase contract. | For higher-risk orders, agree on document review, quantity and marking checks, visual inspection, sampling, and independent testing before shipment. | Inspection report; agreed sampling records; signed release or non-conformance records. |
| Export packaging and documents | Packaging, labeling, shipping documents, and any import documentation depend on the route and destination rules. | Confirm corrosion protection, bundle or coil securing, shipping marks, document language, and consistency among the order, invoice, packing list, and MTC. | Approved packing details; packing list; commercial invoice; MTC; other destination-required documents. |