| 1. VMQ material and temperature range | VMQ is a silicone elastomer used for flexibility across a broad temperature range. Many standard compounds are specified for service around −60°C to 200°C, but the usable range depends on formulation, exposure time, stress, and the application. | Request the grade-specific technical data sheet and confirm its stated continuous and intermittent temperature limits for the intended environment. |
| 2. Compound formulation options | Available options may include different hardness levels, colors, reinforcing fillers, and specialty properties such as electrical insulation or flame resistance. These properties are formulation-dependent. | Ask for a specification tied to the exact compound and color; do not assume a property applies to every grade in a supplier’s range. |
| 3. Hardness and mechanical properties | Hardness is commonly reported on the Shore A scale. Tensile strength, elongation, and tear strength are separate properties and can vary with formulation, cure, and test conditions. | Check the test method, specimen preparation, conditioning, and reported units. ASTM D2240 is commonly used for durometer hardness and ASTM D412 for tensile properties. |
| 4. Compression-set performance | Compression set indicates how much deformation remains after a specified period of compression and recovery. It is relevant to seals and gaskets, but results depend strongly on test temperature, duration, and compression. | Compare results only when the test conditions are equivalent. ASTM D395 is a commonly used compression-set test method for rubber materials. |
| 5. Cure system and processing | VMQ compounds may use peroxide or addition (platinum-catalyzed) cure systems. Cure behavior and processing requirements differ by compound and manufacturing process. | Confirm cure recommendations, post-cure requirements where applicable, and compatibility with the buyer’s molding or extrusion process. |
| 6. Application-specific compliance | Food-contact, drinking-water, medical, and other regulated uses require applicable evidence for the specific material, formulation, and end use. A generic “silicone” description alone does not establish compliance. | Request current declarations, test reports, and scope details relevant to the destination market and application. Verify that the documentation covers the exact grade. |
| 7. Testing and traceability | Consistent lot identification and documented quality checks help buyers manage incoming material variation. Test certificates should identify the tested compound and relevant results. | Ask about batch records, certificate-of-analysis availability, change-control procedures, and how nonconforming lots are handled. |
| 8. Customization and technical support | Some compound suppliers support custom hardness, color matching, or property targets. Feasibility depends on the application, required volumes, and validation needs. | Provide operating conditions and acceptance criteria, then request samples and a written specification before production approval. |
| 9. Supply capability and export readiness | For international sourcing, production capacity, packaging, shipping documentation, and continuity planning can affect supply reliability. These capabilities are supplier-specific. | Confirm lead times, minimum order quantities, packaging format, export documents, and the supplier’s process for communicating supply interruptions. |
| 10. Total cost and qualification effort | Material price is only one part of cost. Tooling, scrap, processing compatibility, testing, compliance documentation, logistics, and qualification time may also affect the total cost of ownership. | Compare quotations against the same grade requirements, test plan, order quantity, delivery terms, and documentation scope. |