| CNC-machined aluminum | Aluminum billet machined to the required tool geometry; cooling channels can be incorporated into the design. | Good heat transfer, repeatable dimensions, and a durable tool surface; suitable for detailed features and controlled production. | Machining and complex internal cooling can increase tooling cost and lead time. | Production parts requiring dimensional consistency, defined surface finish, or efficient temperature control. |
| Cast aluminum | Aluminum poured into a pattern or mold, often followed by machining of critical surfaces and interfaces. | Can produce larger or more complex tool shapes with less extensive machining than a fully machined billet tool. | As-cast surfaces and tolerances may need finishing; cooling performance depends on the tool design. | Medium-to-high production needs where the part geometry and tooling design suit casting. |
| Steel | Tool steel or another suitable steel grade, machined for the required forming surface and tool features. | High strength and wear resistance can support demanding, high-volume service. | Generally heavier and more difficult to machine than aluminum; its lower thermal conductivity can affect heating and cooling cycle times. | Long production runs or applications where resistance to wear and tool life are priorities. |
| Epoxy or composite tooling | A tooling resin or reinforced composite formed over a pattern; construction and heat tolerance vary by material system. | Can be less expensive and quicker to produce than metal tooling for suitable part sizes and requirements. | Temperature limits, wear resistance, and dimensional stability depend on the specific resin, reinforcement, and operating conditions. | Prototypes, bridge production, and lower-volume runs when the selected tooling system can handle the process temperature. |
| Wood or board tooling | A machined wood, resin board, or similar pattern material used as a forming tool or development tool. | Fast and economical to modify for early design checks and short trials. | Typically less durable and less dimensionally stable under repeated heat and production cycles than metal tooling. | Initial prototypes, fit checks, and short-run development work. |
| Male or female mold configuration | A geometric setup rather than a material: a male tool forms the sheet over its exterior; a female tool draws the sheet into a cavity. | The configuration can be selected to suit part shape, surface requirements, draft, and forming behavior. | Part geometry and process conditions determine suitability; either configuration can be made from different tooling materials. | Applications where the required part surface, depth, and material distribution guide tool orientation. |