| 1. Compact manual press | 5–10 metric ton-force | About 150–250 mm square | About 100–150 mm | Varies by hydraulic design; confirm rated pressure and relief setting | Small-batch trials, mold testing, and low-volume production | Check frame rigidity, mold clearance, guarding, and whether manual loading suits the intended workflow. |
| 2. Bench electric-hydraulic press | 10–20 metric ton-force | About 200–300 mm square | About 100–200 mm | Often designed within roughly 16–25 MPa; verify the actual machine rating | Pilot production with powered pressing and modest floor-space needs | Confirm supply voltage, cycle controls, emergency stop, and cleanable product-contact tooling. |
| 3. Small C-frame press | 20–30 metric ton-force | About 250–350 mm square | About 150–250 mm | Model-dependent; compare rated pressure, cylinder size, and force at the working point | Single-mold work where access from multiple sides is useful | Ask for a deflection rating; a C-frame can flex more than a closed-frame design under load. |
| 4. Mid-range H-frame press | 30–50 metric ton-force | About 300–450 mm square | About 150–300 mm | Common design ranges vary; verify the pressure gauge and relief-valve specification | General-purpose production with a larger mold or replaceable tooling | Check platen parallelism, mold mounting, and safe access for loading and ejection. |
| 5. Four-column production press | 50–75 metric ton-force | About 400–600 mm square | About 200–350 mm | Select from the press design; do not infer force from pressure alone | Larger blocks, multi-cavity molds, or repeatable production batches | Request a force-distribution check across the platen and confirm the mold's maximum load. |
| 6. Guided high-force H-frame press | 75–100 metric ton-force | About 500–700 mm square | About 200–400 mm | Confirm rated working pressure, overload protection, and duty rating | Higher-force applications requiring a rigid frame and guided platen movement | Check guarding, interlocks, foundation requirements, and safe mold-change procedures. |
| 7. Custom large-format press | 100–150 metric ton-force | About 600–900 mm square, subject to frame design | About 250–500 mm | Engineer to the required force, cylinder area, and machine duty cycle | Large blocks, specialized molds, or integrated automated production lines | Require a mold-load calculation, documented safety design, and a production trial using the intended salt mix. |