| 1 | Compact-format panel bender | Up to approximately 1,000 mm | Thin sheet, commonly around 0.5–1.5 mm steel | Request cycle time for the buyer’s part and bend sequence | Confirm the supplier’s stated positioning and angle tolerances | Check minimum part size, tooling access, and loading method. |
| 2 | Small-batch flexible cell | Approximately 1,000–1,500 mm | Material- and tooling-dependent; verify by grade | Compare complete part-cycle time, including handling | Run repeated parts and inspect angle and flange variation | Ask how quickly the machine changes between part programs. |
| 3 | General-purpose production machine | Approximately 1,500–2,000 mm | Often suited to thin and medium-gauge sheet; confirm limits | Request cycle-time data for representative production parts | Review test-part results over a sustained run | Confirm rated capacity for the intended material and bend geometry. |
| 4 | Long-format cabinet and enclosure cell | Approximately 2,000–2,500 mm | Thickness capacity varies with material, length, and tooling | Measure the full cycle, including repositioning and unloading | Verify consistency across long flanges and repeated setups | Check floor-space, sheet-support, and operator-access requirements. |
| 5 | High-mix automated cell | Configuration-dependent; commonly selected by part envelope | Confirm separate limits for steel, stainless steel, and aluminium | Compare changeover time as well as bending time | Request repeatability data from a multi-part production trial | Assess programming, automatic tooling, and job-management workflow. |
| 6 | High-volume production line | Selected to match the largest recurring part | Use the exact production material and thickness for validation | Request measured output for the specified part mix | Check first-off and in-process inspection results | Include loading, unloading, downtime, and maintenance in throughput estimates. |
| 7 | Robot-loaded panel-bending system | Determined by the machine and automation layout | Verify handling limits as well as bending capacity | Evaluate end-to-end cell time, not standalone machine time | Check repeatability across both robot handling and bending operations | Confirm guarding, interfaces, and recovery procedures after a stoppage. |
| 8 | Large-panel specialist configuration | Specify the required maximum part length in the RFQ | Obtain a documented capacity chart for the requested length | Test the longest and most complex representative parts | Inspect dimensional results at multiple points along the panel | Ask for a witnessed acceptance test using the buyer’s drawings. |
| 9 | Precision-focused configuration | Choose length based on tolerance-critical parts | Validate each material and thickness combination separately | Record cycle time only after the part meets drawing tolerances | Define an agreed measurement method and tolerance before testing | Review calibration, compensation, and quality-control documentation. |
| 10 | Application-specific engineered cell | Defined by part envelope and production requirements | Set capacity from the actual material specification and geometry | Establish a baseline through a production-representative trial | Agree on sampling, measurement equipment, and acceptance criteria | Compare service coverage, spare-parts availability, and training plans. |
| Data note: The entries above are anonymous buyer-evaluation profiles, not verified specifications for ten individual manufacturers. Panel-bender capacity and cycle time depend on machine configuration, material grade, part geometry, tooling, and automation. Request current technical data and validate performance with representative parts before purchasing. |