| Tantalum purity | 35% | Compare the quoted grade with the 99.95 wt% commercial benchmark. At 99.95 wt%, the nominal balance is no more than 0.05 wt% total impurities. | Lot-specific certificate of analysis (CoA) stating the purity basis, measured result, and applicable specification. | 5 = Meets or exceeds the stated benchmark with lot-specific evidence; 3 = claim supplied but evidence is incomplete; 0 = below benchmark or unsupported. |
| Analytical evidence | 20% | Check whether the results are supported by a documented analytical method and are reported at a level suitable for the agreed specification. | Test method, laboratory details, test date, detection or reporting limits, and a complete result sheet. Request independent verification where required. | 5 = Complete, traceable results with method details; 3 = partial documentation; 0 = no usable test evidence. |
| Impurity reporting | 15% | Confirm that the purchase specification identifies which impurities are controlled and how limits are applied; do not assume one universal impurity limit applies to every order. | Element-by-element results or agreed limits, including relevant metallic and interstitial impurities where specified by the buyer. | 5 = Results address all agreed impurity requirements; 3 = some required results are missing; 0 = no relevant impurity information. |
| Sheet dimensions and tolerances | 15% | Assess the offered thickness, width, length, flatness, and tolerances against the buyer’s drawing or purchase specification. These are order-specific requirements, not inferred from purity. | Dimensional inspection report or written quotation confirming the requested dimensions and tolerances. | 5 = All requested dimensions and tolerances are confirmed; 3 = exceptions are clearly identified; 0 = requirements are not confirmed. |
| Lot traceability | 10% | Verify that material identification can be linked to the supplied test documentation and shipment. | Lot or batch number on the CoA and matching identification on packing and shipping documents. | 5 = Consistent lot-level traceability; 3 = traceability is partial; 0 = documents cannot be linked to the supplied material. |
| Delivery and export documentation | 5% | Compare the quoted lead time, delivery terms, packaging requirements, and destination-specific documentation with the purchase order. | Written quotation, confirmed delivery schedule, agreed Incoterm, and applicable shipping documents. | 5 = Requirements are confirmed in writing; 3 = some details remain open; 0 = no usable delivery confirmation. |